T1255 Direct Drive Surface Miner

• Optional dust suppression system features an enclosed cutting head with two large vacuums to help reduce dust onsite.
• SmartTEC control software displays the status of critical elements of machine performance.
• Help improve efficiency through direct drive power while delivering more horsepower to the cutting drum.

Vermeer’s range of T1255 Terrain Leveler™ Surface Miners is compatible with the On-board Dust Suppression System by Vermeer. This additional feature is a must-have for all hard-rock and tunnelling job sites as it increases productivity and reduces overhead costs. The On-board Dust Suppression System by Vermeer:

• Is hydraulically driven and features and left and right unit, which becomes part of the machine.
• Reduces the need for an external power source or operator which in turn reduces the amount of diesel consumption, emissions and labour costs.
• Uses a baghouse filtration system which requires minimal maintenance and will save time and costs.
• Features superior manoeuvrability which means you can continue to work in confined or closed-in spaces.
• Is also compatible with the T1255 Chain Drive Surface Miner which means you can use this system while cutting high walls.

• Approach Angle: 15 deg
• Height: 146 inches / 370.8 cm
• Width: 134 inches / 340.4 cm

• Make and Model: Caterpillar C18 ACERT Tier 3
• Gross Horsepower: 600 hp / 447.4 kw
• Rated Engine RPM: 2100
• Number of Cylinders: 6
• Fuel Tank Capacity: 370 gal / 1400.6 L
• Operating Range: 11.6 hours
• Fuel Consumption at Full Load: 31.8 gph / 120.4 lph
• Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg
• Air Cleaner: Dry-type with precleaner
• Aspiration: Turbocharged and air-to-air aftercooled
• Cooling Medium: Liquid
• Electrical System: 24 Volt DC
• Oil Filter: Full flow

• Make and Model: Caterpillar C18 ACERT Tier 4 Final
• Gross Horsepower: 600 hp / 447.4 kw
• Rated Engine RPM: 2000
• Number of Cylinders: 6
• Fuel Tank Capacity: 370 gal / 1400.6 L
• Operating Range: 12.1
• Fuel Consumption at Full Load: 30.5 gph / 115.5 lph
• Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles): 35 deg
• Air Cleaner: Dry-type with precleaner
• Aspiration: Turbocharged and air-to-air aftercooled
• Cooling Medium: Liquid
• Electrical System: 24 Volt DC
• Oil Filter: Full flow

• Auto Self Level: No
• Ground Pressure Minimum: 15.5 psi / 106.9 kPa
• Ground Pressure Maximum: 21.1 psi / 145.5 kPa
• Tilt Track Available: No
• Track Drive Type: Dual path hydrostatic with planetary transmission
• Track Length: 181.5 inches / 461 cm
• Track Pad Type: Double grouser
• Track Pad Width Ranges: 30 inches / 76.2 cm
• Track Size: Cat 375 Excavator
• Maximum Ground Speed – Low: 48.1 ft/min / 14.7 m/min
• Maximum Ground Speed – High: 128.4 ft/min / 39.1 m/min
• Parking and Emergency Brake: spring-applied, hydraulic release, wet disc brake
• Service Brakes: Hydrostatic

• Trencher: Yes
• Terrain Leveler: Yes
• Rockwheel: No
• Bucket Wheel: No

• Cab: Yes
• Control System: TEC Plus with SmartTEC
• Air Conditioner/Heater: Yes
• Air Suspension Seat: Yes
• AM/FM Stereo with Weather Band: Yes
• Elevating: Yes
• Pressurized/Filtered Air: Yes
• Roll Over Module (ROM): Yes

• Oil Tank Capacity: 210 gal / 794.9 L
• Oil Type: HyPower 68, HyPower 100, Hy Power 1100
• Pressure Setting: 2500 psi / 172.4 bar
• Pump Flow at Maximum RPM: 28.7 gpm / 108.6 L/min
• Pump Type: pressure-and-flow-compensated (load-sensing)